Adhesive use can be a sticky topic… or not if you don’t abide by the general rules for using glues and adhesives around the house.

When you are undertaking interior design or home improvement tasks, a bit of glue can come in handy from time to time, excpet when you don’t understand adhesive use.

When you are using particularly strong adhesives, you need to be careful to not get yourself into any sticky situations (only one glue pun in this article, I promise).

So, here is some helpful advice to get you started if you are not experienced in adhesive use.

Adhesive Use and Not Coming Unstuck

adhesive use

Choose the Best Product and Applicator

First of all, you need to choose the right product for the job that you are completing, whether this is standard super glue or Ritetack Instant Grab Adhesive.

Consider the surface that you will be applying the glue to and decide which product to go for based on this.

There are also plenty of different types of applicator including standard tools, precision tips and adhesive guns.

adhesive use

Cover Up Surrounding Surfaces

Once you have settled on your product, your next step is to do some preparation work. Cover up the surrounding surfaces with rag cloths or a similar protective material that you don’t mind getting covered in glue.

Otherwise, you could end up ruining your surrounding surfaces. For the adhesives to have a greater effect, you should sand the surfaces down with a light sandpaper. Also, you should clean them thoroughly so that the glue doesn’t end up bonding to the dirt.

A damp cloth is the best way of clearing away dust and debris. You should also be looking out for grease and rust as well.

Use a Small Amount of Adhesive

When you are using very strong adhesives, you need to apply them sparingly. If you are using superglue, the recommended amount is one small drop per square inch of surface area.

Applying too much will actually create an inferior bond, so this is something that you should be looking to avoid.

Drying time is usually pretty quick – around 30 seconds or less – after which, the two things should be bonded together firmly.

adhesive use

Allow Time for the Curing Process

Next up, it is just a waiting game as you allow a few hours for the curing process to complete. This will ensure maximum strength and adhesion, ensuring that you have created a bond that will last.

You should also keep any water away from the application area as this can end up reducing the strength of the bond.

A dry and well-ventilated area is always best when you are undertaking any task involving adhesives.

Hopefully, this guide has given you a good general overview of what you need to do when you are applying adhesives in your home.

There are plenty of ways that glue can be used around the house, so you should check out a few of these to give you some inspiration.

Essentially, you just need to make sure that you do enough prep work to keep everything protected and ensure that the adhesion lasts for the longest time possible.